Height Transfer Gage, 0 - 24"/0 - 600mm Range
HEIGHT TRANSFER GAGE, 24"
A snug on the slide provides two holes (.375" [9.5mm] and .156" [4mm]) for holding gage rods or scribers
Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
Hand-fitting base design for sure-grip handling and easy movement
Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod
The rod has a major diameter of .375" (9.5mm) and stepped diameters of 1/4" (3.2mm) and 7/32" (5.5mm) at one end and 5/16" (8mm) at the opposite end.
Thumb screw allows slide to be locked
![HEIGHT TRANSFER GAGE, 24"](/vendors/1152301/large/252Z-24cUSp1.jpg "HEIGHT TRANSFER GAGE, 24"")
