Customers who require extremely high productivity can rely on the Voortman V630 CNC drilling machine with three independent drilling heads. The machine can drill both flanges and the web at the same time, which significantly reduces working hours and operating costs. Each drilling head has its own automatic tool changer with five tools suitable for HSS drills, carbide tipped drills, thread tapping, counter sinking, layout marking and center point marking. This feature combined with the overall unmatched automation level of the Voortman CNC drilling lines eliminates the need of an operator being present at the drilling line!
Voortman V630 Details: FAST CARBIDE DRILLING Using synchronized servo drives with ball screws for each movement as well as a large 30 kW servo drive for the drilling spindle results in amazing acceleration. Maximum speed is reached in just a fraction of time, and maximum torque in the full range from 1 to 2,500 RPM is perfect for carbide drilling.
FAST PROFILE MEASURING Roller feed measuring and transportation system The Voortman roller feed system is the fastest measuring and transportation system for profiles in the market. This system combines two driven and two pressure rolls, which use their large contact area to firmly clamp the profile during processing. The two separate measuring discs keep an accurate track of the position of the profile while moving it with high speed. As the profile needs to be clamped only once, waiting time is eliminated.
GRIPPER TRUCK MEASURING AND TRANSPORTATION SYSTEM For customers who require a lot of small products, or who want to fully automate the removal of small products and clean cuts, Voortman offers a strong and fast servo driven gripper truck as measuring and transportation system capable of moving even the heaviest profiles without losing its stability. To increase the automation level of the CNC beam drilling machine, automatic Short Product Removal System (SPRS) is available. All products up to 1.200 mm / 4 ft will be clamped during cutting. After cutting it will be transported from the saw and pushed out sideways. Clean cuts are dropped into a separate bin. This system is only possible in combination with a gripper truck.
WEB AND FLANGE HEIGHT MEASUREMENT All our beam drilling machines automatically measure the web and flange height with a pneumatic probe. This design compensates for mill tolerance issues and automatically corrects the measurements from the edge or center as needed automatically prior to running the material.
PROFILE WIDTH MEASUREMENT When the material is clamped, the width of the profile is measured. The software checks whether the correct profile size is inside the machine as well as compensating for mill tolerances.
THREE INDEPENDENT DRILLING HEADS Customers who require extremely high productivity can rely on the Voortman V630 CNC drilling machine with three independent drilling heads. The stable and high quality drilling machine can drill both flanges and the web at the same time, which strongly reduces working hours and operating costs. Next to this, each drilling head has its own automatic tool changer with five tools.
FOUR SIDES LAYOUT MARKING Another amazing advantage is the layout marking on four sides, when only marking three sides assembly personnel still need to measure manually on the fourth side of the profile. A separate unit can be installed in the drilling machine, for layout marking the bottom side of the profile. This unit uses the same tool as the drilling heads. In this way, the Voortman V630 CNC drilling machine can mark all four sides which will save time and costs in the assembly area of your workshop.
The beam drilling machine can utilize a layout marking tool to create part numbers, contours, welding information and detailed part numbers for plates and angles that will be welded to the profile. Voortman’s layout marking is driven by compressed air and runs at 20.000 rpm. The tools have a carbide tip with 4 usable sides which can easily be exchanged.
VN 36 HYDRAULIC NUMBERING UNIT The hydraulic numbering unit can be used for hard stamp marking of products with part numbers, so that it can be recognized in further production steps. It consists of a frequency driven rotating disk which contains 36 exchangeable characters, with a height of 10 mm. The characters are hydraulically pressed into the steel, with an imprint of 1 mm.
AUTOMATIC TOOL CHANGING Each drilling head has its own automatic tool changer with five tools suitable for HSS drills, carbide tipped drills, thread tapping, counter sinking, layout marking and center point marking. This feature combined with the overall unmatched automation level of the Voortman CNC metal drilling machines eliminates the need of an operator being present at the drilling line!
