Capacity: 25" W x 36" H @ 90 degrees
25" W x 25" H @ 45 degrees
25" W x 17" H @ 60 degrees
Blade: 2" x 24'8" x .063"
Arm Cant: 4 degree
Bar-Feed: 0-48" Stroke Hydraulic Motor
Motor: 15 HP
Hydraulics: 5 HP
The Control Console is located on the front of the saw, in a swing-away console, for operator convenience.
The Touch Screen display provides easy-to-use menu navigation for programming and recalling automatic save jobs, nested job operations, as well as manual functions and programming information required for each job. Other functions include memory storage for a Job Library, Material Library, system setup information, diagnostics and saw operation parameters.
The Auto Run screen controls the Computer Controlled Feed system which makes programming and running a job in automatic easy. Any pre-saved job can be entered into the Auto Run, or the operator can program a job. The quantity, length, height, angle, blade speed, cut rate and cut force are then entered and transferred to the Auto Run. The information can then be saved as a job and can be operated on the saw at any time.
Icon driven programming simplifies the operator's job by automatically setting the fields up for the type of cut selected. Then the information can be entered manually or there is a standard material list to choose various materials from. The part length, height, angle of cut, and quantity are entered for the cut and then transferred to run automatically. Blade speed, feed rate, cutting force, and blade/vise options are also set before transferring to run automatically.
The material list consists of a database of the most common materials, ranging from structural steels to high tensile specialty alloys, as well as cast iron and aluminum grades. The list also includes the recommended blade speeds, cutting rates and blade pitch for the type and size of material. The data can then be transferred to a job and run automatically.
A series of cuts for certain parts can be programmed to be cut from the same bar stock by entering up to 12 jobs that will be run in a sequence. The sequence can be run up to 99 times by placing an amount into the "Reps" section. Up to 99 program series can be created and saved in the menu.
In Manual Run mode, the saw operator can make a single, semi-automatic cut without creating a program. The blade and various vise options can be controlled from this screen or the console.
The control panel allows for quick I.O. and system operation to calibrate the encoders and help diagnose a possible problem with operation of the saw.
Help files are available to assist in operating the saw. These include: a blade symptom chart, length convertor, basic calculator saw safety section and blade change instructions.
The Powered Programmable Tilt feature places the saw column to any angle up to 60 degrees right or left of 90 degrees. The mitering capability is an easy adjustment powered from Console with LED Angle Readout displayed on the Touch Screen. This allows the operator to change angles quickly and accurately. The miter angle tilting is automatic when a program requires different angles for each job.
Blade speed can be adjusted with an infinitely variable speed drive which allows the user to adjust blade speed's surface feet per minute which is set and adjusted from the Touch Screen. Blade speeeds are preset and adjustable in the material library.
The Powered Blade Tensioner maintains proper blade tension at all times during the cut, compensating for blade stretch. Changing blades on vertical saws are done in minutes with the use of the Powered Blade Tensioner.
A shaft-driven Blade Brush is standard for positive removal of metal chips that lodge in the blade gullets. This system ensures a cleaner blade, more accurate cuts and prolonged blade life.
The Blade Guide System incorporates side and back blade guides that utilize carbide inserts for long wear, stability and maximum blade support.
The patented Cut Watcher System monitors the cut for squareness to a pre-set deviation value. The system shuts down the saw when the pre-set value is exceeded. This is a must for production cutting.
Blade Saver, often used when cutting bundles of material. This function reduces wear and tear on the blade when retracting through a cut. It also reduces blade "snagging" on the material as it is retracting after a cut. When the Blade Save is active, the blade is still forward after a cut is complete.
The ECT, Electronic Controlled Traverse System, allows for complete control of cutting rate and cutting force during the cutting operation.
Full-Stroking Main, 2nd Main & Feed Vise clamp material at the turn of a switch or icon and holds the material in place to ensure accurate cuts. In automatic mode the vises open and close automatically
The clamping pressure is easily adjusted to clamp various materials.
A 3rd holding vise works in conjunction with the main holding vise to assist in holding the material while is is being cut and also aids in aligning the material before it goes into the shuttle vise area.
The saw has a set of Power Raised Lift-Up Rollers on each side of the saw base to aide in moving material into the vises.
The saw has a standard 0 to 48" Stroke, automatic bar-feed system with multiple indexing capability for longer cutting applications. The material jogging capability allows the operator to "inch" the material forward to set up for a face cut or a single cut.
The Powered Moveable Guide Arm provides optimum blade support as material size changes. It quickly adjusts the guides that hold the blade securely, providing straighter cuts and longer blade life.
The saw has a totally built-in coolant system with sealed coolant pump with coolant that is dispensed through a flex-tupe nozzle to flood the center of the cut. A cutting fluid clean-up hose is provided for machine wash down.
The saw is equipped with a safety Emergency Stop cut-off switch. This allows the operator to closely monitor the cutting process and quickly stop it if needed.
The Safety Lockout Key is used to disable saw operation during maintenance.
The saw will automatically shut off if the blade breaks or is out of stock shown by the Broken Blade or Out-of-Stock indicators.
The Panic Stop haults all automatic functions.
A Powered Chip Conveyor allows chips moved out of the base of the saw and into a chip bin for easy removal.
An optional Laser Light indicates either above or below where the blade will enter the material for the cut.
An Optional Swing-Away Top Clamp can be added to the main vise for vertical clamping of structural shapes and when entire "mill bundles" are to be cut.
A Full Capacity Top Clamp can be added to the feed vise for vertical clamping of structural shapes and when entire "mill bundles" are to be cut.
The optional spray mist system lubricates the blade with a mist that is adjustable at a rate of 4 - 200 pulses per minute, pushing the mix of oil/air out of the delivery line to the nozzle.