View All HE&M Saws

HEM Saw H130HM-DC Details:

Dual Column, Metal-Cutting Production Band Saw

Capacity: 20" W x 20" H
Blade: 1.5" x 19'0" x .050"
Motor: 10 HP
Hydraulics: 2 HP

Swing-Away Control Console

The Control Console is located on the front of the saw, in a swing-away console, for operator convenience.

24" Solid Discharge Table

A standard solid discharge table provides easier handling after the cut. The table is 24" in length and is fully coolant panned.

Full Stroking Main Vise

A Full-Stroking Main Vise clamps material at the turn of a switch and holds the material in place to ensure accurate cuts. The clamping pressure is easily adjusted to clamp various materials.

Carbide Blade Guides & Lead In/Lead Out Roller Guides

A blade guide system is composed of side and back blade guides which are flat carbide inserts. In addition to precision-ground flat carbides, roller guides are used to reduce vibration when cutting hard materials.

Built-In Flood Coolant System

The saw has a totally built-in coolant system with sealed coolant pump with coolant that is dispensed through the guides on each sides of the cut.

Adjustable Feed Rate & Cut Pressure

The saw arm Feed Rate can be adjusted from zero to 3 inches per second. Cutting pressure can be adjusted for effective metal removal rates.

Blade Brush

A shaft-driven Blade Brush is standard for positive removal of metal chips that lodge in the blade gullets. This system ensures a cleaner blade, more accurate cuts and prolonged blade life.

Push button Blade Speed

Blade speed can be adjusted with an infinitely variable speed drive from the console with push button controls. The blade speed is shown on the console with LED Readout.

Powered Guide Arm

The Powered Moveable Guide Arm provides optimum blade support as material size changes. It quickly adjusts the guides that hold the blade securely, providing straighter cuts and longer blade life.

Powered Blade Tension

The Powered Blade Tensioner maintains proper blade tension at all times during the cut, compensating for blade stretch. Changing blades on the saw is done in minutes with the use of the Powered Blade Tensioner.

Emergency Stop

The saw is equipped with a safety Emergency Stop cut-off switch. This allows the operator to closely monitor the cutting process and quickly stop it if needed.

Other Safety Features

The Safety Lockout Key is used to disable saw operation during maintenance.

The saw will automatically shut off if the blade breaks shown by the Broken Blade indicator.

The Panic Stop haults all automatic functions.

The HEM Saw H130HM-DC offers these optional upgrade items:

An optional Outboard Vise on the discharge helps with clamping of material.

The Optional Computer Controlled Traverse, or CCT, controls the feed rate and cutting force to maintain the optimum cutting rate.

With the CCT option, a Material List is provided with the touch screen. The list includes the recommended blade speeds, cutting rates and blade pitch for the type and size of material.

The Shadow Light uses a high intensity light that casts a shadow of the blade onto the material to be cut indicating the exact spot where the blade will enter the material.

A Laser Light indicates either above or below where the blade will enter the material for the cut.

The optional spray mist system lubricates the blade with a mist that is adjustable at a rate of 4 - 200 pulses per minute, pushing the mix of oil/air out of the delivery line to the nozzle.

A Full Capacity Top Clamp can be added to the main vise or outboard vise for vertical clamping of structural shapes and when entire "mill bundles" are to be cut.

An optional Chip Auger removes chips from the cutting area into an easy-to-empty container. Chips and coolant are automatically separated into two different containers

Discharge, Load & Roller Stock Tables