Capacity: 16" H x 20" W
Blade: 1-1/4" x 15'8" x .042"
Motor: 7.5 HP
The Control Console is located in an Easy View style control on a gooseneck mount, and can be pivoted for operator convenience.
A standard 24" solid discharge table provides easier handling after the cut. The table is 24" in length and is fully coolant panned.
The saw vises slide on the vise ways. When the clamp is engaged, the air powered short stroking vise is pulled toward the fixed wear plate, clamping the material in place to ensure accurate cuts. The clamping pressure is easily adjusted to clamp various materials.
Hold down fixtures also aid in the clamping of multiple pieces of material in a single row.
The saw arm Feed Rate can be adjusted from zero to 3 inches per second. Cutting pressure/force can be adjusted for effective metal removal rates.
Blade speed can be adjusted with an infinitely variable speed drive from the console with push button controls. The blade speed is shown on the console with LED Readout.
The Guide Arm is adjusted manually to help stabilize the blade and reduce vibration, providing a better cutting surface.
A blade guide system is composed of side and back guides, which are flat carbide inserts.
The Manual Blade Tensioner help to keep the blade at the proper tension. It assures and maintains proper blade tension at all times during the cutting process.
A shaft-driven Blade Brush is standard for positive removal of metal chips that lodge in the blade gullets. This system ensures a cleaner blade, more accurate cuts, and prolonged blade life.
The saw has a totally built-in coolant system with sealed coolant pump. The coolant is dispensed through the guide arms on both sides of the cut.
The saw is equipped with a safety Emergency Stop cut-off switch. This allows the operator to closely monitor the cutting process and quickly stop it if needed.
The saw will automatically shut off if the blade breaks, shown by the Broken Blade Indicators.
The Panic Stop haults all automatic functions.
The optional spray mist system lubricates the blade with a mist that is adjustable at a rate of 4 - 200 pulses per minute, pushing the mix of oil/air out of the delivery line to the nozzle.
An optional reduced capacity top clamp can be added to the main vise for vertical clamping of structural shapes.
An optional Chip Auger removes chips from the cutting area into an easy-to-empty container. Chips and coolant are automatically separated into two different containers
Optional 10' Roller Load Table, and 5' or 10' optional idle roller tables with 12" centers are available for material handling. The tables are non-coolant panned and height adjustable to be "trued-in" with the saw. They are designed to move even the large bars with ease and accuracy.